8DI/6DO, relay output, AC90~260V, cannot expand BD board
- XINJE provides PLC products with powerful functions and rich models.
- XC3 Standard type: This sub-series belongs to the standard models of XC series PLC. They
could fulfill most using requirements.
Support two kinds of program languages
- In XC series PLC，besides statement format，you can also adopt ladder chart on the
screen. And, these two formats could convert to the other.
Rich basic functions
- Based on the theory of“Basic functions、High speed dispose、convenient to use”, XC
series PLC can support not only functions relative to sequence control，but also basic
application instructions of data transfer and compare、arithmetic and logic control、loop
and shift of data etc.，besides, it can support interrupt、high-speed counter exclusive
compare instructions、 high-speed impulse output and other high-speed dispose instructions.
Offset function (Indirect addressing)
- Add offset suffix after the coil、data register (e.g. X3[D100]、D0[D100]) to realize
indirect addressing. E.g. when D100=0, X3[D100] means X3，D0[D100] means D0;
when D100=9, X3[D100] means X14，D0[D100] means D9；
Single phase or AB high speed counter
- The high speed counters in XC series PLC carry on interrupt disposal with the high
speed pulse from special input points. So it is independent with the scan cycle, the
count speed can reach 200KHz.
Convenient MODBUS communication instructions
- With Modbus communication instruction, PLC can easily communicate with every
kind of peripheral device as long as they have Modbus protocol.
High speed pulse output
- The main units have two routes pulse output, output can be sequencial segments, each
segment of pulse number could be set freely. The pulse could reach 400KHz.
Be the first to review “Xinje XC3-60T-E”