fbpx
,

XINJE XC3-14T-C PLC

Availability:

Out of stock


TECHMART INDUSTRIAL COMPONENTS ARE AVAILABLE ON BACKORDER 

DELIVERY TO CLIENT WITH IN 10-15 Days

6 Months Warranty 

රු22,900.00

Out of stock

8DI/6DO, relay output, DC20~30V, cannot expand BD board

  • XINJE provides PLC products with powerful functions and rich models.
  • XC3 Standard type: This sub-series belongs to the standard models of XC series PLC. They
    could fulfill most using requirements.

Support two kinds of program languages

  • In XC series PLC,besides statement format,you can also adopt ladder chart on the
    screen. And, these two formats could convert to the other.

Rich basic functions

  • Based on the theory of“Basic functions、High speed dispose、convenient to use”, XC
    series PLC can support not only functions relative to sequence control,but also basic
    application instructions of data transfer and compare、arithmetic and logic control、loop
    and shift of data etc.,besides, it can support interrupt、high-speed counter exclusive
    compare instructions、 high-speed impulse output and other high-speed dispose instructions.

Offset function (Indirect addressing)

  • Add offset suffix after the coil、data register (e.g. X3[D100]、D0[D100]) to realize
    indirect addressing. E.g. when D100=0, X3[D100] means X3,D0[D100] means D0;
    when D100=9, X3[D100] means X14,D0[D100] means D9;

Single phase or AB high speed counter

  • The high speed counters in XC series PLC carry on interrupt disposal with the high
    speed pulse from special input points. So it is independent with the scan cycle, the
    count speed can reach 200KHz.

Convenient MODBUS communication instructions

  • With Modbus communication instruction, PLC can easily communicate with every
    kind of peripheral device as long as they have Modbus protocol.

High speed pulse output

  • The main units have two routes pulse output, output can be sequencial segments, each
    segment of pulse number could be set freely. The pulse could reach 400KHz.

General specifications:

Item

Specification

Insulation Voltage

Above DC 500V 2Mohm

Noise Resistance

1000V 1uS pulse for 1 minute

Environment Temperature

0centigrade degree ~6centigrade degree

Ambient Humidity

5%~95%

COM 1

RS-232, be connected to host machine or HMI for programming or debugging

COM 2

RS-485/RS-232, network or connect to intelligent instrument, inverter, etc.

Installation

M3 screw fixed or DIN46277 (35mm width) guide rail installation

Grounding

The third type grounding (Never perform common grounding with strong power system)

Performance:

Item

Specification

Program Operation Mode

Circulation scanning mode, timing scanning mode

Program Mode

Instructions and ladder chart

Dispose Speed

0.5us

Power Failure Holding

FlashROM

User Program’s Capacity

2500 steps

I/O Points

8 input points, 6 output points

Output Format

Relay

Power Supply

DC20~30V

Interior Coil’s Points (M)

8512 points

Timer(T)

Points

620 points

Specification

100mS timer: set time 0.1~3276.7 seconds

10mS timer: set time 0.01~327.67 seconds

1mS timer: set time 0.001~32.767 seconds

Counter(C)

Points

635 Points

Specification

16 bits counter: Set value K0~32767

32 bits counter: Set value K0~2147483647

Data Register(D)

8512 characters

FlashROM Register(FD)

2048 characters

High-speed Count Format

High speed counter, pulse output, exterior interruption

Timing Scanning Interval Setting

1~99mS

Password Protection

6 characters ASCII

Self-diagnose Function

Power on self-diagnose, monitor timer, grammar check

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “XINJE XC3-14T-C PLC”

There are no reviews yet.